Single post

Use Of Epoxy Primer

When we talk about painting a surface the most important part is the cleaning of the surface that has to be painted. There are various kinds of paint supplies in the market now days that makes the painting process easier. The surface that is to be painted must be washed with any soap and water before the repairing process begins. Wipe the surface then down with any wax and grease remover. During the repairing process, you must use the compressed air to ensure the clean surface. Blow carefully before you apply body filler or coating putty. This will guarantee good bond and remove numerous problems throughout the painting process. There are various kinds of painting that are being used like spray paint and epoxy enamel spray paint. For all kinds of painting, repairing is required which is made possible with the epoxy primer paint.

What Is Primer?

Primer is considered a preliminary coating put on a materials before starting to paint it. Priming makes sure better bonding of any paint to the surface, it also increases durability of paint, and delivers extra shield for the material that is being painted.

Adhesion is said to be the key point to use primer. But, in self-propelled primers, it also offers corrosion guard as well. Therefore, an epoxy primer that is best to provide both adhesion and corrosion shield is highly recommended.

Applying the epoxy primer:

All the epoxy primers are needed to be sprayed inside the required spray area. Where ever you are thinking to use perfect spray paint or epoxy enamel spray paint, epoxy enamel is highly recommended. If you are suing a primer to a small area, you must consider dropping the liquid, contraction to the fan pattern and then turning the air pressure down. This will enable to spray smaller regions with less over spray paint. Make sure to cover all the areas that were smoothed for the purpose of painting. Apply medium coats to cover the repair area. Don’t forget not to spray epoxy primer all the way to your covering paper. Keeping the primer zone as small as possible can provide the stress-free mending.

Flash time is known to be the quantity of time that is required between the applications of coats. Rushing in between the flash time can result in different problems. Every coat must have enough time to flash to permit all of the thinners to evaporate. If you are applying another coat before the flashing off the primer will trap the solvent. Loss of bonding is a one of the most common problem. One coat must be done at a time. It is highly recommended that there must be no double coats or you must not rush in between the flash times. You already have spent a lot of time on the repairing process, don’t waste it now by rushing. A little patience can result in best outcomes of spray paint.

theme by teslathemes